Connect your analyzer system to your PC by connecting the PC with a normal UTP cable to the HMI.

Or, on the base board undo the switch PoW and connect the UTP cable in the RJ45 connector.

Or, connect to the VPN router (cost apply).

Once connected use Remote Desktop (free app from Windows) to take over the screen. First set your wired ethernet IP address settings to 192.168.8.10 Subnetmask 255.255.255.0

In Windows Explorer type in: FTP://192.168.8.99

Then in the USB_1 stick connection you find all data

More pictures will follow.