Does Arenal offer HART protocol
Yes, we offer HART protocol in our analyzer, however our analyzer offer much more information then can be transmitted over this protocol.
The protocol does not suit process analysers, only small pressure and temperature transmitters.
We suggest to connect our analyzer in the LAN network and communicate by Modbus TCP/IP.
Related Articles
How to get support from Arenal Support Team?
Hello, Welcome to the Arenal Service & Support Team in The Netherlands. We are trying to support you the best we can. We are working on a full automatic response system for small questions. When this is implemented (possibly end of February) we ...
What is the hardness of the sintered silicon carbide probe
Our sensor QP015-UDP-SIC is made from sintered silicon carbide (SSiC). Arenal is the only company making ultrasonic sensors with this material. Is is designed to fit in mineral processing plants and dredging and rilling applications. It does not wear ...
7 Years warranty on the probe !
New warranty from April 1, 2023: The QP015-UDP-SiC-LT probe is covered by a seven-year warranty. During this period, products that prove to be defective will, at the discretion of Arenal Mining & Dredging B.V., be either repaired or replaced, without ...
How to get remote connection through the LAN network
Question: If the RMM (QM146-RMM-GSM-WVPN-WIFI) is not, or cannot be connected, but the customer wants us to get access to the analyzer, how can Arenal connect to to the analyzer remotely? In that case you have two options. 1. Use our LAN VPN modem in ...
What is the maximum pressure of our sensor?
The maximum pressure of our SSiC sensor (QP015-UDP-SIC-LT) is 80 bar. This is not officially tested, but tested during an indicative test. We could test it on higher pressures on request. For higher pressures, like 600 or 6000 bar, we can create a ...